HP2-K08 exam
Supporting the MSA1000, 1500cs & 1510i
Exam Number/Code : HP2-K08
Exam Name : Supporting the MSA1000, 1500cs & 1510i
Questions and Answers : 106 Q&As
Update Time: 2009-12-18
HP2-K08 Price: $ 198.00

It is well known that HP2-K08 exam test is the hot exam of HP certification. Test4pass

offer you all the Q&A of the HP2-K08 real test . It is the examination of the perfect

combination and it will help you pass HP2-K08 exam at the first time!

HP2-K08 Supporting the MSA1000, 1500cs & 1510i Exam Datasheet
Interpretation of subsystem displays to verify operation and check
status
Controller firmware upgrades
Supported configurations
HPHP2-K08 Default usernames and passwords
Command Line Interface
Firmware updates
Perform troubleshooting and repair procedures
Logical drive failure and impact on operational state
Power up/Power down sequence
Slot diagram labels for the MSA1500cs/MSA1510i
Correct use of SCSI I/O module cabling, Ethernet iSCSI I/O

test4pass Available Study Materials For HP2-K08 Exam
test4pass offers free demo for HP APS HP2-K08 exam (Supporting the MSA1000, 1500cs &

1510i). You can check out the interface, question quality and usability of our practice

exams before you decide to buy it. We are the only one site can offer demo for almost all

products.
So you can get the exams from various resources but the logical and the precise explanation

to your study guide questions is only here. Just download the test4pass HP2-K08 study

guides, test4pass HP2-K08Braindumps, test4pass HP2-K08 Practice Test and study them for a

bright future in IT.

Exam Pdf Demo

Test4pass Easiest way to pass IT exams
Test4pass Help You Pass Any IT Exam http://www.test4pass.com
Exam : HP HP2-K08
Title : Supporting the MSA1000,
1500cs & 1510i
Version : Demo
Test4pass Easiest way to pass IT exams
Test4pass Help You Pass Any IT Exam http://www.test4pass.com
1. What is a characteristic of the read-ahead caching mechanism?
A. Every I/O goes directly to the respective disk.
B. The data read from the disks stays in cache until it reaches a threshold.
C. Every I/O goes into the RAID controller cache and in a background operation to the respective disk.
D. The RAID controller reads more data than requested from the disks, predicting the next read from the
host that needs this additional data.
Answer: C
2. Which statement is true regarding a dual-path configuration with a single controller?
A. It is not supported.
B. It requires Secure Path software.
C. It is supported without Secure Path software.
D. It requires the Redundancy Manager software.
Answer: C
3. What are two functions of RAID level 5? (Select two.)
A. uses only one physical disk in the array for parity
B. distributes the parity onto every available disk in the array
C. distributes two different parities onto every available disk in the array
D. usually has the highest cost per GB of usable space because it duplicates the data
E. has moderate costs per GB because it uses the capacity of one disk for parity per array
Answer: BE
4. Which Fibre Channel topology is used for host connection with a single MSA Hub 2/3?
A. fabric
B. multipath
C. dual loop
D. arbitrated loop
Answer: D
Test4pass Easiest way to pass IT exams
Test4pass Help You Pass Any IT Exam http://www.test4pass.com
5. Which drive type is best for holding large amounts of reference data?
A. ATA
B. SCSI
C. SATA
D. Fibre Channel
Answer: C
6. What is the operational configuration limit for Secure Path 4.0c for Windows in an MSA storage
environment? (Select two.)
A. a maximum of 20 hosts per set of shared storage systems (per profile)
B. a maximum of 128 hosts per set of shared storage systems (per profile)
C. a maximum of 256 storage systems shared by a set of hosts (per profile)
D. a maximum of 32 LUNS per target with a maximum of two paths per LUN
E. a maximum of 128 LUNS per target with a maximum of two paths per LUN
Answer: BD
7. How can you extend the storage capacity of a logical drive using the Array Configuration Utility? (Select
two.)
A. Add a hot spare to the array.
B. Add a new disk to the logical drive.
C. Add unused space from any array to the logical drive.
D. Add a new disk to the array where the logical drive resides.
E. Add unused space from the array where the logical drive resides.
Answer: DE
8. Which statement about MSA-supported multipath software is correct?
A. The QLogic Multipath Driver is required for Linux operating systems.
B. HP Secure Path is required for all MSA-supported operating systems.
C. The QLogic Multipath Driver cannot be used for Linux operating systems.
D. HP Secure Path and the Microsoft Multipath I/O driver (MPIO) can be used for all MSA-supported
Test4pass Easiest way to pass IT exams
Test4pass Help You Pass Any IT Exam http://www.test4pass.com
operating systems.
Answer: A
9. What is the Storage Management Utility?
A. a replacement for the Array Configuration Utility
B. an alternate management tool for MSA1xxx systems
C. a dedicated management tool for MSA1510i systems
D. a replacement for the MSA1510i Command Line Interface
Answer: C
10.Which rule applies for spare drive configuration with the Storage Management Utility for the MSA1510i?
A. A spare disk must be the same speed as the other drives in the array.
B. A spare disk can be mixed with SCSI and SATA drives in the same array.
C. A spare disk must be the same size (or smaller) as the other drives in the array.
D. A spare disk must be the same type (SCSI or SATA) as the other drives in the array.
Answer: D